D-rings 4pcs (includes glue 2025)

4pcs adhesive D-rings with a durable PVC base, easy to glue on all sup trucks. Can also be glued on a curved surface. Conveniently build your own sup-truck with D-rings, whether it's for fasteners for kayak benches or for more space on your sup-board! You'll also need a bungee cord.

Note! This kit is sold without glue, but you can use the glue supplied with the sup-board repair kit.

• Three different colour options
• Diameter 80mm
• Durable construction

Mounting instructions:

1. Select the desired installation location and mark the spot on the board, you can draw around the area of the d-ring with a pencil, clean the area thoroughly and finally you can mark the area with painter's tape(to avoid adhesive stains later). For a better finish, you can also lightly roughen the surface to be glued with sandpaper.
   
2. Apply an even thin layer of glue to both surfaces
3. Allow the glue to dry for about 5 minutes, then apply another thin layer on both surfaces
   
4. Now press the d-ring onto the board and press evenly from the centre towards the edges so that the edges are firmly adhered, and the excess glue is swollen onto the masking tape.
5. Remove the protective tape and allow to dry for 24h

Tarjoamme nopeat 1-3 päivän toimitukset Matkahuollolla, DB Schenkerillä sekä Postilla. Kun tilauksesi käsitellään, saat tilauksellesi seurantakoodin.

Toimituskulut alkaen 4,90€.

Tarkempaa tietoa toimituksesta löydät täältä

Tarjoamme monipuoliset ja turvalliset Paytrailin maksutavat.

Voit maksaa tilauksesi joko verkkopankilla, luotto- tai pankkikortilla, mobiilimaksulla, laskulla tai osamaksulla.